| Main Output | ||
 Waveforms |
SINE, TRIANGLE, SQUARE, TTL pulse and CMOS output | |
| Amplitude |
>20Vp-p (open circuit) , >10Vp-p (into 50 ohm load) | |
| Impedance |
50 ohm+/10% | |
| Attenuator |
-20dB+/-1.0dB (at 1kHz) | |
| DC Offset |
<-10V to >+10V(<-5V to> +5V into 50 ohm load) | |
| Duty Control |
1:1 to 10:1 continuously rating | |
| Display |
6 digits LED display | |
| Frequency Range |
0.2Hz to 2 MHz 7 ranges | |
| Sine Wave | ||
| Distortion |
<1% 0.2Hz ~ 200kHz | |
| Frequency Response |
<0.1dB 0.2Hz ~ 100kHz, <0.5dB 100kHz ~ 2MHz | |
| Square Wave | ||
| Symmetry |
<2% 0.2Hz ~ 100kHz | |
| Rise/ Fall Time |
<120nS | |
| Triangle Wave | ||
| Linearity |
98% 0.2Hz ~ 100kHz, 95% 100kHz ~ 2MHz | |
| CMOS Output | ||
| Rise/Fall Time |
<30nS | |
| Level |
3 digits3Vp-p | |
| TTL Output | ||
| Rise/Fall Time |
<25nS | |
| Level |
>3Vp-p | |
| V.C.F | ||
| Input
Voltage |
Approx. 0V~10V (± 1V) input for 1000:1 frequency ratio | |
| Input Impedance |
10k ohm (±10%) | |
| Frequency Counter | ||
| Mode |
INT/ EXT. switchable | |
| Range |
0.2Hz(5Hz EXT)~10MHz | |
| Accuracy |
±Time base accuracy ±1 Count | |
| Time Base |
Oscillation frequency 10MHz, Temp.stability±10PPM (23¢XC±5¢XC) |
|
| Resolution |
0.1Hz, 1Hz, 10Hz, 100Hz | |
| Sensitivity |
<25m Vrms | |
| Power Source | AC 100V, 120V, 220V, 230V, ±10% 50/60Hz | |
| Accessories | GTL-101¡Ñ2 Instruction manual ¡Ñ 1 |
|
| Dimensions | 230(W)¡Ñ95(H)¡Ñ280(D) mm | |
| Weight | Approx 2.1kg | |